High Speed Door Servo Control System
Introduction
Thank you for choosing High Speed Door Servo Control System.
Please read this manual carefully before you start to use the system. In this manual you will find instructions for how to set the operating code the controlunit, malfunction diagnostics and debugging, and routine maintenance.
Notice:
Before connecting the system to live wire place make sure the power supplyis off.
Please make sure the power voltage in the main circuit is the some ascontroller’s rated voltage. Also please make sure the ground terminal is properly and reliably connect to the ground wire.
DO NOT touch output terminal directly. DO NOT shot circuit the outputterminal and out shell.
After the power supply is cut, and before the LCD is off, there still highvoltage electricity in the circuit, so DO NOT touch the internal wiring and electronic components.
Internal wiring and electronic components are very sensitivity to staticelectricity, so DO NOT let any object contact the internal wiring and electronic components of motor driver and the main circuit of the touch control panel.
Inspection
All product has passed inspection and testing before is leaving the factory.
When you open the unit place make sure there is no damager during shipping.
Also to confirm the equipment ratings are matching your requirement.
General Characteristic
Our servo control system is suitable for high speed PVC and aluminum doors.
The system is in compact package, with high torque and high operating speed,lower noise, high reliability, smooth and soft operating curves, it’s suitable for high speed and intensive usage environment.
The rolling curtain can be controlled by wall switch, push button, bluetooth, radar,safety edge, photo eye, induction loops, etc.
Operating Speed: 0.5m/s-1.5m/s; Operating Width: ＜16 ㎡/30 ㎡/60 ㎡; Daily operating time: 2000 time; Rated voltage: 220V; Rated Output: 0.75KW/1.5KW/2.2KW。
具体分析译文资料：
快速门伺服控制系统
价绍
感谢您选择高速门伺服控制系统。
在展开运用机系统此前，请细致入微阅读训练本实用实用手册。在本实用实用手册中，您将找到了有关的信息咋样将运营码設置为保持模快，机械故障检测和调整各类平常服务器维护的说明书。
目光：
在将系统的衔接到地线前面，请提高认识外接电源已关。
请保障主电路系统中的开关电源电阻值是设定器的额定容量电阻值。其他，请保障接地线绝缘端子准确是真的吗地联系到地线。
不可立即触摸屏输入接线接线端子。不需要打靶输入接线接线端子和外层。
立即切断电源线后，在LCD关停之后，电路系统中仍要都存在低光电探测器，由此不要摸内层连接线和电子器材器件。
内控连接线头和电子无线设备电气电气元件对消除静电极为敏锐，故而不可让丝毫材料使用电动机管控器的内控连接线头和电子无线设备电气电气元件包括触模管控表面面板的主电线。
常规检查
拥有类产品在出厂设置前都以依据检测和测式。
打开浏览器设施设备时，请保障在物流运输过程中 中不会有破损者。
并且核定设施设备额定负载值符合国家您的规范。
寻常特殊性
必一运动 的步进驱动器保持平台不适应用于飞速PVC门和铝门。
该系统软件采取密布型二极管封装，兼具高功率，高加载高速路度，低噪声，高正规性，平缓软软的进行操作身材曲线，不适广泛用于高速路，密布的用到区域。
卷帘窗帘是可以完成墙面墙壁打开，开关按钮，蓝牙，统计，应急边部，光眼，传器电磁线圈等来进行有效控制。
加载快慢：0.5m / s-1.5m / s;销售横向：<16㎡/30㎡/60㎡;一天操作方法时段：2000次;固定端电压：220V;固定的输出：0.75KW / 1.5KW / 2.2KW。
